Value-Leader Commercial Duty Adjustable Deck Flail Mower

The Value-Leader CMAD flail mowers are the best multi-purpose mower in its size and power class. With a standard flail mower the material you are cutting is retained under the deck until it is expelled down like with a rotary mower, with the opening rear deck of the CMAD (Commercial, modified adjustable deck) You may open the rear of the flail mower and let the cut material expel, similar to the discharge of a lawnmower. This allows you to cut faster when you wish. In addition, is great for changing mower blades.

• Structural Q235 Roll formed robot cut and fitted steel for durability and quality. 4 Gauge deck & 1/4″ sided plates.
• 27 ounce 3 1/8″ wide forged tool steel hammer blades cut/chop up to 3″ diameter grass, weeds & brush, or optional durable “Y” rock knifes for faster cutting.
• 14.5″ blade swing provides fast blade tip cutting speed for faster mowing. 136 feet per second.
• 5″ balanced blade holder tube for smooth operation and long bearing life.
• External access to rotor shaft bearings makes service far easier.
• Balanced steel V-Belt pulley to eliminate vibration.
• Anti-clumping shredder bar welded under the deck improves mulching and wet grass cutting.
• Dual Cat-I/II quick hitch comparable 5/16 inch steel tube 3-point hitch with both fixed and slip top.
• Offset from center to get mower past your tractor for mowing near or around objects.
• Multiple tuff V-Belts provide positive drive to the blades and external belt tighten make maintenance quick and easy.
• Heavy duty 65 horsepower steel gearbox with internal over-running clutch allows blades to spin down gradually. Without it, the rotor shaft slams to a stop when power is removed from the mower, which can damage tractor & mower.
• Replaceable side skids assist with anti-scalping and reduce surface gouging.
• Bearings are easily accessed for greasing and zerks are shielded from damage.
• Full-width rear roller with minimum cutting height adjustment from 1/2″ to roller has tapered ends to eliminate gouging when turning corners. Roller has scraper bar to remove buildup mud and debris as you mow.
• Powder coat finish keeps your mower looking good longer as it is more rust resistant and durable than a spray finish.

Overall Width of Flail Mower: The Value-Leader VL-MFCMAD series has a overall width of 47″ to 84″ depending on the size of the unit.

Cutting Width of Flail Mower: The Value-Leader VL-MFCMAD series has a tilling width of 41″ to 78″ depending on the size of the unit.

Weight of Flail Mower: The Value-Leader VL-MFCMAD series has a weight 493 lbs to 1000 lbs depending on the size of the unit.

HP Requirements at PTO: The VL-MFCMAD series requires 20 – 65 PTO horsepower depending on the size of the unit.

Cutting Height: The Value-Leader VL-MFCMAD series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The Value-Leader VL-MFCMAD series has a housing thickness of 4 gauge.

Side Plate Thickness: The Value-Leader VL-MFCMAD series has a side plate thickness of 1/4″.

Blade Type: The Value-Leader VLMFCMAD series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). The Y-blades weigh 10.9 oz. Use the hammer blades for clearing saplings (3″ diameter or less), and the Y-blades for grasses.

Number of Blades: The VL-MFCMAD series uses 16 – 32 hammer blades or 32 – 64 Y-blades, depending on the size of the unit.

Precision Blade Overlap: On the VL-MFCMAD series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Hinged Rear Gate: This allows for easy inspection, cleaning, blade changing, and maintenance of your machine. The rear gate can also be left open for easier discharge in heavy conditions, or you can close the gate to greater mulching.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Rotor Swing Diameter: 14 1/2″ Large swing so that the blades build required inertia.

Hitch Type: Category 1 or 2 standard 3-point.

Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 1″ to 22″ depending on the size of the unit.

Drive Belts: The Value-Leader VL-MFCMAD series uses 2 – 3 belts, depending on the size of the unit.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.